WONKE can provide a large selection and style of Terminal Blocks for your wiring needs from leading manufacturers in both industry standard and unique designs. Terminal blocks can be found in control panels to interconnect the panel wiring both internally and to the field wiring. Terminal blocks also provide a crucial role for good wire management in your project. Configurations are offered for power distribution, DIN rail styles, standard terminal blocks, and wire-to-board. There is also a wide variety of specialized styles.
The UK terminal block is a very common terminal. The UK terminal block is used to facilitate the connection of the wire. It is actually a piece of copper that is sealed inside the insulating plastic. There are holes at both ends to insert the wire, and screws are used for fastening or Loosen, such as two wires, sometimes need to be connected, and sometimes need to be disconnected, this can be connected with terminals, and can be disconnected at any time without having to solder or entangle them, it is convenient and quick. Moreover, it is suitable for a large number of wire interconnections. In the power industry, there are special terminal blocks, terminal boxes, all of which are terminal blocks, single layer, double layer, current, voltage, ordinary, breakable and so on. A certain crimp area is required to ensure reliable contact and to ensure sufficient current is passed.
The comfort of use of the combination terminals depends to a large extent on the accessories of the terminals. For the UK range, all relevant wiring requirements can be achieved in a way that saves both storage space and ease of operation. The stampings, screws and small sleeves of the bridge are made of a special copper alloy that has been tinned or nickel plated. At least 70% of the current rating of the terminal's rated current can flow through all of the bridges.
Contact Person: Mrs. Zoey Zheng